RC-Warbirds Newsletter December 2010
New Year Promotion
We have slashed our prices for JetTeng Models. 
From 1st December 2010 till 28th February 2011 we are offering special prices on all JTM models. This offer is valid for in stock items and pre-ordered models.
Current pre-order waiting time is 4 weeks from order placed till shipping. Please note: We expect this new year promotion to have an impact on waiting times as the factory might not be able to cope with the demand. Hence if you wish to get an updated lead time before placing your order, please drop us an email.
BEA Hawk Pre-order
L-39 Pre-order
JTM Hawk – Swiss Color
The JTM BAE Hawk in the colors of the Swiss Airforce is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro.
The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing.
The model comes completely pre-painted with all decals applied and protected by a clear coat.
Further is the cockpit glued and all hatches are assembled and locks are installed in place. The Model features a full flying stabilizer, ailerons and flaps. A rudder is not cut out but can be fitted relatively easy by the modeler.
This model is truly ARF with all the major work done for you. One example is the flying stabilizer which comes completely assembled. Only 4 screews need to be tightened to install it on the model.
New Colors: L-39
The JTM L-39 is now available in 2 additional striking colors:
- Navy Color (L3906)
- Breitling Jet Team – Black (L3907)
Both colors are now available for pre-order. Make use of your JetTeng New Year promotion now !!
Back In Stock: JTM Hawk – 2010 Demo Team
The JTM BAE Hawk in the colors of the RAF 2010 Demo Team is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro.
The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing.
The model comes completely pre-painted with all decals applied and protected by a clear coat.
Further is the cockpit glued and all hatches are assembled and locks are installed in place. The Model features a full flying stabilizer, ailerons and flaps. A rudder is not cut out but can be fitted relatively easy by the modeler.
This model is truly ARF with all the major work done for you. One example is the flying stabilizer which comes completely assembled. Only 4 screews need to be tightened to install it on the model.
Back In Stock: JTM L-39 HPAT
The JTM L-39 Albatros in the colors of the High Performance Aircraft Training School (HPAT) is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro.
The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing.
The model comes completely pre-painted with all decals applied and protected by a clear coat.
Further is the cockpit glued and all hatches are assembled and locks are installed in place. The Model features flaps.
This model is truly ARF with all the major work done for you.
JetCat P80 SE
Introducing the new JetCat P80-SE with more POWER and enhanced reliability.
The P80-SE continues JetCat’s extremely successful P80 engine.
The new design of the P80-SE incorporates an optimized compressor/diffusor-system, resulting in higher engine performance and reliability.
The engine follows throttle commands almost without delay.
In addition to the outstanding features of or ECU V6.0, the new ECU V6.3 has an -auto power down- function built in, which allows to switch off the engine power supply (–> receiver off) before the engine cool down sequence has been finished.
In this case the ECU will stay powered on, finish the cool down sequence and then auto power down itself.
JetCat KeroStart
Convert your engine to kerosene startup.
Includes fittings & Manual.
Please note: For V6.0 ECUs or newer only. Older ECU can be upgraded.
Please contact us or JetCat for further information regarding the ECU Upgrade
Airpower Valve Mount
Pisco & Festo Ball Valve Mount
Includes one Mount and mounting hardware for 4mm or 6mm Festo ball valves.
Airpower Digital Gauge
Dual digital air gauge for rc model planes with pneumatic retracts, doors or brake systems.
Dual display of 2 independent air tank pressure readings.
Specifications:
- 25mm x 14mm LCD Display Screen
- Dual Air Pressure Value Display
- Three Pressure Unit Selection – PSI / Kg-cm2 / BAR
Airpower Multi Connect
This easy-to-use air-line connector for pneumatic systems allows quick and easy assembly and disassembly of multiple airlines (5).
The unit is rated at over 140 psi. It will not twist or kink the air line and is compatible with all pneumatic systems.
