November 2011 features a picture taken during one of our trips to Nusa Jaya Malaysia. Mr. Hengs, amazing Twin turbine powered SU-27 shortly before the maiden flight..
Just released, the new Jet Teng (JTM) full composite Viper Jet in 5 amazing color schemes. The Viper Jet is a jet aircraft designed and produced by Viper Aircraft Corporation in kit form for homebuilding. It is a conventional, low-wing monoplane with swept wings and tail and two seats in tandem under a bubble canopy. The jet intakes are located at the sides of the fuselage and the tricycle undercarriage is retractable. Construction throughout is of composite materials
The JTM ViperJet in the colors of the High Performance Aircraft Training school (HPAT) is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. A turbine conversion to JetCat P-20, Lambert T25 or Wren 44 (see video below) can be done easily. Please check with us on suitable turbines, pipes and accessories. The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing. The model comes completely pre-painted with all decals applied and protected by a clear coat. Further is the cockpit glued and all hatches are assembled and locks are installed in place. This model is truly ARF with all the major work done for you. Retracts and suitable scale oleo struts are available as option.
Pack contents: Fully painted and finished glass fiber fuselage, fully assembled vertical fin and pre-installed ducting, clear canopy with pre-installed lock, one-piece fully painted and finished glass fiber wing with aileron, flap and retract hatches, exhaust ducting sheet, small parts, hardware pack, gear door covers.
The HET L-39 Albatros is a high performance EDF Jet with fiberglass fuselage and foam/balsa wings suitable for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. A turbine conversion to JetCat P-20 or Lambert T25 (see similar conversion done with the JTM Hawk) can be done. Please check with us on suitable turbines, pipes and accessories. The model features a fiberglass fuselage and foam/balsa wings with retract hard points pre-installed in the nose and retract hatches. The model comes completely pre-painted. The Model features flaps. This model is truly ARF with all the major work done for you. Retracts and suitable scale oleo struts are available as option
The brand new HET-RC Me-262 is a high performance Jet for TWIN EDF units such as the WeMoTec Mini Fan 480 or the HET-RC 6904 and 2x powerful brushless motors such as the HET-RC Typhoon 2W, 3W or 2W-20 EDF. The ARF kit features a olive green painted fiberglass fuselage with balsa sheeted foam wings. This new revised version of the Me262 now features retract gear mounting points which are the perfect match for the optional available electric retracts system and oleo strut set.
The Messerschmitt Me 262 Schwalbe (German: “Swallow”) was the world’s first operational turbojet fighter aircraft. It was produced in World War II and saw action starting in 1944 in bomber/reconnaissance and fighter/interceptor roles. It was officially named Schwalbe because the swallow, when in a dive, is one of the fastest birds known. German pilots nicknamed it the “Turbo,” while the Allies called it the “Stormbird.” While the Me 262 had a negligible impact on the course of the war (approximately 150 Allied aircraft losses for 100 Me 262 losses), its design had a strong influence on postwar aircraft development.
The HET Me163 Komet is a Fiberglass Model with Foam/Balsa Wings powered by a 70mm EDF unit. The model has enough space to accommodate LiPo packs of various sizes allowing either 3s or 4s configurations Speed freak – beware !!!!!
The SM80-45 EDF system is based on the highly successful SM89-45 and SM110 multiblade rotor design. Specially designed for the new 80mm fan Jets out there (e.g. eFlite Habu) Unlike traditional EDF units, the SM80-45 features a 11 blade rotor for improved static thrust and sound. Turbine like sound in an small scale EDF model is a dream come through thanks to this fan.
Grumania Martin Baker Ejection Seat Kit in 1/10th scale. Although the ejection seat was originally made for the Grumania F 100, it fits other jets of similar size very well. The Kit consists of moulded plastic parts that can easily be assembled using CA glue.The seat is extremely light. Sizes (approx.): Height…………..: 115mm Depth……………: 65mm Width……………: 58mm
Add scale realism in looks and function to your model air plane. Whether you use fixed or retractable landing gears, these struts can be fitted. Helps to smoothen landings and improves ground handling, especially on grass fields. Package includes 3 pieces of trailing oleo struts (2x mains, 1x nose) and wheels.
Electric retract Set with aluminum oleo struts – suitable for EDF Jets and planes up to 2.5kg The electric retract set features: - 3 seconds overcurrent/jamming protection - Auto recovery after overcurrent and jamming protection - Smart circuit to prevent retract unit from accidentally retracting when powering on the radio (even if the retract switch is set to retract up) - Includes fitting to twist the strut 90 degrees when retracted - Suitable voltage 4.8-6V - 85gram retract loading – Working current 0.1-0.3A
Electric retract Set with aluminum wire struts – suitable for EDF Jets and planes up to 2.5kg The electric retract set features: - 3 seconds overcurrent/jamming protection - Auto recovery after overcurrent and jamming protection - Smart circuit to prevent retract unit from accidentally retracting when powering on the radio (even if the retract switch is set to retract up) - Includes fitting to twist the strut 90 degrees when retracted - Suitable voltage 4.8-6V - 85gram retract loading – Working current 0.1-0.3A
The Airpower MSD-400 Multi Servo Distribution System can used to use one servo input signal to simultaneously drive up to four servos. The MSD-400 allows for accurate adjustment of servos when driving one common control surface with up to 4 servos. The servo and receiver power supply can be separated by using a separate battery pack for the servos. Specifications: Size………………………….: 46mm L x 11.10mm H x 25.80mm W Weight………………………: 10 gram Current Draw……………..: 20 mA Operating Voltage………..: 4.8V~9.0V
With the size of a model usually powered by kerosene turbines, a composite molded fuselage and balsa wings and the simplicity and lower cost of an EDF Jets, the SAPAC BAE Hawk 100mm is the perfect entry into large scale rc jet models. The model is designed for 100mm EDF Units such as the Stumax SM100 or TamJets TJ100. Please see the drop down menu below for available power options.
With the size of a model usually powered by kerosene turbines, a composite molded fuselage and balsa wings and the simplicity and lower cost of an EDF Jets, the SAPAC T-45 100mm BAE Hawk is the perfect entry into large scale rc jet models. The model is designed for 100mm EDF Units such as the Stumax SM100 or TamJets TJ100. Please see the drop down menu below for available power options. Pack contents: Assembly instructions in English, pre-painted fiberglass fuselage, covered balsa wings, molded fin and balsa tail surfaces, small items, clear canopy, linkage hardware pack including nylon control horns, PVC and optional composite ducting and decal sheet
Introducing the new JetCat P20-SE, the baby turbine from JetCat. The JetCat P20-SE is the long awaited solution for small EDF Jet conversions. With 2.4kg thrust, this turbine can power any 90size EDF Jet (examples: JTM Hawk, JTM L-39, TamJets 1/12th scale F-16…..). The engine follows throttle commands almost without delay. The P20-SE comes with the new V10 ECU. Not only does it feature an incredible small size & weight, the new bus system makes installing your components a breeze. With one cable running from ECU to turbine (instead of 2 with the older versions) and one cable running from ECU to pump and on to the 2 solenoid block.
The HET L-39 Albatros is a high performance EDF Jet with fiberglass fuselage and foam/balsa wings suitable for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. A turbine conversion to JetCat P-20 or Lambert T25 (see similar conversion done with the JTM Hawk) can be done. Please check with us on suitable turbines, pipes and accessories. The model features a fiberglass fuselage and foam/balsa wings with retract hard points pre-installed in the nose and retract hatches. The model comes completely pre-painted. The Model features flaps. This model is truly ARF with all the major work done for you.
The HET Flying Wing in yellow color is a 1.8 meter wingspan powered glider for slope, ridge and thermals. Combined with a brush less motor and the included 10×6 folding prop and spinner, the HET Flying Wing is capable of powerful climbs. The HET Flying Wing features a fiberglass fuselage and foam/balsa sheeted wings. The Model completely build and requires a minimum of assembly. With it’s large speed envelope the Wing is suitable for beginners as well as experienced pilots looking for a aerobatic glider with good wind penetration. The Wing can be build as glider or powered glider.
The 3rd Jet for a 90mm Fan unit from HET-RC. Unlike the other 2 models (Sniper 90 and F-18), the HET-RC F-16 features a epoxy fiberglass fuselage resulting in a lighter body and more chip resistant surface. The F-16 is a available in 4 distinct color schemes, Edwards AFB, General Dynamics, Gray and Thunderbirds. The model is fully prepared for a retractable landing gear (see options below) and allows the installation of working gear doors. Powered by 8-10S and with its included wingtip missiles, this model will be the star at every flying site.
A great way to save some $$$. This Air Control System Kit Pro supports any Air Retract, Door and brake system Complete with: - 2x Airpower EV-2U Dual Action Valves - 1x AirPower EV-1U – Brake Valve - 1x Digit Dual Air Gauge - 2x Air System Fill Valve with Chuck - 10x Barbed Airline Fittings - 4x Airpower 1/8″ / 3 mm Air Tubing Mount - 10meter of Airpower 1/8″ Air Line - 2x Airpower Air Tanks this complete installation kit leaves no desires open.
The HET-RC L-39 Retracts are specially designed for the HET-RC L-39 Albatros composite EDF Jets. The set comes complete with air tank, hose and valves. These retracts come with oleo struts mounts suitable for the optional available HET-RC L-39 Oleo Struts.
Oleo Struts specially designed for the HET L-39 90 size EDF Jet. Add scale realism in looks and function to your model air plane. Whether you use fixed or retractable landing gears, these struts can be fitted. Helps to smoothen landings and improves ground handling, especially on grass fields. Package includes 2 trailing main gear oleo units with wheels and one trailing nose oleo strut with fork mounted wheel
The HET Flying Wing in yellow color is a 1.8 meter wingspan powered glider for slope, ridge and thermals. Combined with a brush less motor and the included 10×6 folding prop and spinner, the HET Flying Wing is capable of powerful climbs. The HET Flying Wing features a fiberglass fuselage and foam/balsa sheeted wings. The Model completely build and requires a minimum of assembly. With it’s large speed envelope the Wing is suitable for beginners as well as experienced pilots looking for a aerobatic glider with good wind penetration. The Wing can be build as glider or powered glider.
July 2011 features another photo taken during the 2008 TopGun Event in Lakeland Florida. This time we feature a BVM Ultra Bandit captured during a knife edge flyby.
AirPower Models are pleased to present their all new retract units. Made from Anodised aluminium these units feature air up and air down operation and are intended to use in models from 9kg / 20lbs up to 20kg / 45 lbs in weight. Designed to be retro fitted in many of today’s sport models these units are able to withstand operation from grass and tarmac fields. The main pivot block is made from high quality 7075 aluminium and machined to accept a 1/2” oleo strut. Retained in a clamp type mount that ensures a secure fixing with less chance of the leg rotating. The pivot pin is deliberately oversized in a effort to make all three units more rugged. The nose retract come as standard with the steering mechanism pre fitted as well as the straightening spring, although this can easily be removed and replaced with a 1/2 inch Oleo leg. The RA-215 are available as singular units or as a complete kit of 3 units.
AirPower’s RA-250 retract offers an ultra low profile that is only 27mm in height. This retract is able to take a 7/16″ diameter Strut. Also available is a standard gear wire in 3/16″ for Main Gears. The Retract is constructed out of high quality aircraft grade 6061-T6 & 7075 aluminum. The RA-250 Retracts is designed to replace other manufacturers retract systems and are the strongest retractable landing gear in the industry for this size.
Full electric retract set for the CARF Spark. The Tamjets / E-flite retract set is based on the original E-flite 60 – 120 Tricycle Electric Retracts set. However in order to support the weight of the Spark and make the retract unit more durable in general, Tamjets replaced the original E-flite trunion with an stronger unit machined out of high strength aluminum. In addition this new trunion is now capable of utilizing the proven Tamjets trailing oleo struts for the CARF Spark. The set further includes a set of Tamjet TJ Pro-Lite wheels and brakes to complete the combo.
High performance inflatable model tire with pneumatic brake and 5mm Wire strut + adapter. Inflatable tire with metal rim. The tires comes with precision ball bearings (6mm). Tire is replaceable. Suitable for all retract mechanics with 5mm wire adapter (wire strut is included in the set)
From January 2011 we will bring you a new PC and Mobile Phone Wallpaper every month. January 2011 was kicked off by a picture of a F9F Cougar we took during the 2007 TopGun event in Lakeland Florida. Our February 2011 wallpaper features 2 true warbirds, a P51 Mustang and a P47 Thunderbolt. This picture was taken by us during the 2010 Jet & Warbird meet of the MFC Dachau in the south of Germany. Make sure to check out the video of this event on our youtube channel. Although we are snapping pictures like crazy, we would be happy to feature your shot as one of our monthly pictures. Drop us an email to send us your shot !
Unlike the other 2 models (Sniper 90 and F-18), the HET-RC F-16 features a epoxy fiberglass fuselage resulting in a lighter body and more chip resistant surface. The F-16 is a available in 4 distinct color schemes, Edwards AFB, General Dynamics, Gray and Thunderbirds. The model is fully prepared for a retractable landing gear (see options below) and allows the installation of working gear doors. Powered by 8-10S and with its included wingtip missiles, this model will be the star at every flying site.
Also available in Edwards AFB Colors Also available in Gray Color
The HET Me163 Komet is a Fiberglass Model with Foam/Balsa Wings powered by a propeller. A powerful brushless motor in the nose of the plane combined with pylon prop allows this sleek jet to reach high speeds (see our FOX Composites Me-163 Video with speeds in excess of 320km/h or 200mph). The model has enough space to accommodate LiPo packs of various sizes allowing either 3s or 4s configurations with motors in the range of 300 to 900 Watt power.
A high performance ESC for brushless powered EDF Jets, sport and aerobatic planes and gliders. For 2S-6S LiPo The ESC features easy programming via transmitter or the optional available programming card.
High Quality Grumania Jet Models Pipe. Each Jet Pipe is custom made to order for your specific jet. Simply let us know how long your jet pipe needs to be and for what engine you require it and we will do the rest. Each pipe comes with a intake funnel for better heat shielding.
Bulkhead Fuel Fitting for Turbine Jets, Gasoline and Nitro Powered Model planes. Allows for easy connection of fuel lines though bulk heads. Ideal suitable to connect overflow and taxi tanks. Fits ID 1/8” Tubing .
Airpower Gear and Door valve suitable for all pneumatic-operated (air) retractable Landing gears and gear door cylinders. Can be operated with mini or micro size servos.
The perfect Lipo charger for your startbox or just to be placed inside the car for emergency recharging of small flight packs and TX/RX Packs. Specifications: - Charges 1-5 LiPo or Li-Ion Cells - Balancer in-build - Charge current from 0.1A to 5A in 0.1A steps - Input: 11-15V DC - LCD Display shows charging data - Automatic polarity check
Add realism to your model plane with full working retract doors. This set includes everything you need to add working retract doors to your jet. The set includes 3 air cylinders with 12mm stroke, offset gear door hinges for 3 gear doors, airvalve mount and air valve to toggle the door movement. The system will be connected to your existing retract air circuit.Door open action is slvaed to the retract valve so that the doors open at the same time as the gear is deployed. Door close function is independently activated by the included valve which need to be driven by a separate servo. The perfect match for Tamjets 1/12 F-16, Aeronaut Rafale, JTM BAE Hawk or Jet Teng L-39 Albatros
The HET-RC F-16 Retracts are specially designed for the HET-RC F-16 Fighting Falcon composite EDF Jets. The set comes complete with air tank, hose and valves. These retracts come with oleo struts mounts suitable for the optional available HET-RC F-16 Oleo Struts.
Oleo Struts specially designed for the HET-RC F-16 EDF Jet. Add scale realism in looks and function to your model air plane. Whether you use fixed or retractable landing gears, these struts can be fitted. Helps to smoothen landings and improves ground handling, especially on grass fields. Package includes 2 main gear oleo units with wheels and one nose oleo strut with mounted wheel
From 1st December 2010 till 28th February 2011 we are offering special prices on all JTM models. This offer is valid for in stock items and pre-ordered models.
Current pre-order waiting time is 4 weeks from order placed till shipping. Please note: We expect this new year promotion to have an impact on waiting times as the factory might not be able to cope with the demand. Hence if you wish to get an updated lead time before placing your order, please drop us an email.
The JTM BAE Hawk in the colors of the Swiss Airforce is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing.
The model comes completely pre-painted with all decals applied and protected by a clear coat. Further is the cockpit glued and all hatches are assembled and locks are installed in place. The Model features a full flying stabilizer, ailerons and flaps. A rudder is not cut out but can be fitted relatively easy by the modeler.
This model is truly ARF with all the major work done for you. One example is the flying stabilizer which comes completely assembled. Only 4 screews need to be tightened to install it on the model.
The JTM L-39 is now available in 2 additional striking colors: - Navy Color (L3906) - Breitling Jet Team – Black (L3907) Both colors are now available for pre-order. Make use of your JetTeng New Year promotion now !!
The JTM BAE Hawk in the colors of the RAF 2010 Demo Team is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing.
The model comes completely pre-painted with all decals applied and protected by a clear coat. Further is the cockpit glued and all hatches are assembled and locks are installed in place. The Model features a full flying stabilizer, ailerons and flaps. A rudder is not cut out but can be fitted relatively easy by the modeler.
This model is truly ARF with all the major work done for you. One example is the flying stabilizer which comes completely assembled. Only 4 screews need to be tightened to install it on the model.
The JTM L-39 Albatros in the colors of the High Performance Aircraft Training School (HPAT) is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing.
The model comes completely pre-painted with all decals applied and protected by a clear coat. Further is the cockpit glued and all hatches are assembled and locks are installed in place. The Model features flaps. This model is truly ARF with all the major work done for you.
JetCat P80 SE
Introducing the new JetCat P80-SE with more POWER and enhanced reliability. The P80-SE continues JetCat’s extremely successful P80 engine. The new design of the P80-SE incorporates an optimized compressor/diffusor-system, resulting in higher engine performance and reliability. The engine follows throttle commands almost without delay.
In addition to the outstanding features of or ECU V6.0, the new ECU V6.3 has an -auto power down- function built in, which allows to switch off the engine power supply (–> receiver off) before the engine cool down sequence has been finished.
In this case the ECU will stay powered on, finish the cool down sequence and then auto power down itself.
Convert your engine to kerosene startup. Includes fittings & Manual. Please note: For V6.0 ECUs or newer only. Older ECU can be upgraded. Please contact us or JetCat for further information regarding the ECU Upgrade
Dual digital air gauge for rc model planes with pneumatic retracts, doors or brake systems. Dual display of 2 independent air tank pressure readings. Specifications: - 25mm x 14mm LCD Display Screen - Dual Air Pressure Value Display - Three Pressure Unit Selection – PSI / Kg-cm2 / BAR
This easy-to-use air-line connector for pneumatic systems allows quick and easy assembly and disassembly of multiple airlines (5). The unit is rated at over 140 psi. It will not twist or kink the air line and is compatible with all pneumatic systems.
The SM90-45 EDF system is based on the highly successful SM110 multiblade rotor design.
Unlike traditional EDF units for the 90mm class, the SM90-45 features a 11 blade rotor for improved static thrust and sound.
Turbine like sound in an small scale EDF model is a dream come through thanks to this fan.
Suitable for output power of more then 3kw. At the tested input power of just under 3kw, the SM90-45 is giving just over 10lb (4.6kg) static thrust.
The SM90-45 features a FSA of 4771sqmm.
AirPower Five Action Super Multi-function Valve – EVO / ST
The AirPower 2010′ new EVSD-5U-Evo offers everything you could possibly need or want in a gear system controller.
All new software separates the sequencer timing so each setting is completely independent of each other, simplifying the sequencer programming.
In addition, you can now test the antilock brake setting without having to exit the programming sequence. Increase the voltage measurement function of the source and up to 3A Landing lights control system.
- 35mm x 20mm LCD Display Screen
- Dual Air Pressure Value Display
- Build inside Gear System Fail Safe
- Prevents an accidental gear-up when the transmitter is turned
- Compatible For 2.4 Ghz Radio System
- The intuition and simple programming operation
- Three Pressure Unit Selection – PSI / Kg-cm2 / BAR
- Pulse Brake function that can be adjusted
Also Available as SP Version – same features as above but comes without the landing light harness and small parts
AirPower Five Action Multi-function Valve
This new 5 port electronic valve covers all your needs in once brilliant device.
The Airpower EV5U multiport valve offers operation of your Gear, Doors and Brakes offering a fully programmable sequencer built in as well.
With sizing similar to a standard receiver, the EV5U offers a host of convenience in a simple, cost effective package. This one valve replaces 2 Dual Action Valves, 1 Brake Valve, 1 Sequencer and 3 Servos!
Easy programming of preset modes of fully custom sequences via the included EV-PC Program Card
Clear LED status display.
Electronic Dual Action Valve
This Airpower new electronic dual action valve offers electronic control of retracts or gear doors in one convenient electronic valve.
Supplied with barbed airline fittings
Electronic Single Action Valve
Completely digital brake control. Can be used as an on/off or proportional brake valve.
Also great for Air-Up / Spring down landing gear and speed brakes.
AirPower D-7 Lightweight Air Cylinders
AirPower light weight gear door cylinders. Available in sized from 12mm (1/2”) stroke to 44mm (1 3/4”) stroke.
The perfect cylinder for EDF jet and turbine model gear doors.
Fill Valve Set – Three Output
AirPower valve and fill chuck for pressurizing pneumatic systems include a no leak check valve to ensure that the system pressure is maintained.
Compatible with hand pumps or small portable air compressors.
The valve is made of durable aluminum. Three output simplifies installation and eliminates the need for an additional Tee connector.
Includes securing nut and fill chuck. Tested to 160psi.
AirPower Air System Water Trap
STOP pumping water into your air systems!! Our new air system water trap is a must have add-on for your air compressor. Using the element and cyclone effect, the water trap removes the dust and water drops sucked in by the compressor. Extend the life of your cylinders, As much as 99.9% of water is removed from the inside of air tubes by our own special collision separation technique! Can be used inline on compressor or mounted onboard the aircraft.
The water trap can be opened to empty it.
3 mm Barbed Tubing Connect
Dual Air Gauge – Fill Valve Assembly
AirPower Dual Air Gauge – Fill Valve Assembly
This lightweight machined Aluminum alloy mount is pre-assembled and ready for install. Includes two Pisco air gauges and two AirPower filler valves.
Makes for a nice and tidy install. (and saves some $$$)
Also available as Wide Version
Pro-Link Titanium Pushrods & Ball Links
High strength Titanium Pro-Link Push Rods and Ball Links for large scale RC models, EDF Jets and Turbine powered models. Available in lengths from 38mm (1 1/2”) to 127mm (5”).
Ball Links available in packages of 2 or 6
Electric Accessories
New electric accessories incl:
- Multiplex Power Connectors for battery or servo connections
- 10AWG Silicon wire for high power EDF applications
- 12AWG Silicon wire for high power EDF applications
RC-Warbirds will be closed for summer holidays from 25th June till 19th July. Orders placed after 23rd June can therefore only be shipped once we return on 19th July. We are sorry for the inconvenience caused. We wish you and your family a great summer vacation (with good weather for some RC flying). And our customers in the southern hemisphere a great winter with some time to prepare the models for the next season .
Your RC-Warbirds Team
Typhoon 700 Motors
The new line of High End RC Typhoon 700 Motors are designed for high power EDF jet applications. With a can length of 60mm and 68mm these motors are designed for output powers of more the 3000kW for lipos ranging from 5S all the way to 12S.
Starting with the 10-12S Typhoon 700-68 we now have the first motors in stock.
New motor types are arriving nearly on daily basis. Make sure to check out our webpage frequently
Lipo and current draw recommendations are listed for each motor type on our webpage.
Q-Disconnect
2 pairs of Quick Connectors for retract air lines and retract tubing. Allows for easy separation between wing and fuselage airlines for retracts or brake systems. Also available as self closing valves (to keep air from leaking out when disconnected).
.
HD T-Connector
Set of 10 High Density Plastic T-Joiners for Airlines. Suitable for 1/8” and 3mm retract and brake airline. Also available as X connector with 4 ends. .
EZ Wing Servo Mount
Wing servo mount special make for JR 168 or Hitec 5125. Mounting servos has never been easier before. Just glue the base to your servo hatch or wing skin and screw the servo in place. .
EZ Servo Mount – Medium
Mounting servos has never been this easy than before. Why bother spending hours to install your servo. Go the easy way. The Medium size servo mount comes with a #2 screw hardware package. This Medium Servo Mount is best suited for servos such as the JR 9411, 9011 and any other servo with a housing length of around 35mm (1.37 ”) Also available as Standard Mount. Will fit most Standard Servos such as the JR 537, 2721, 8411. Hitec 335, 635, 5645, 5945, 5975 and standard Futaba servo. .
Tamjets – Servo Screws
Tamjets #2 Servo Screws with hex head. Length: 7/16" (11mm) Quantity: 100 pieces Easy installation of servos at difficult locations with the hex head and the help of a ball head allen key. Also available with 9/16" (14mm) length.
November 2011 features a picture taken during one of our trips to Nusa Jaya Malaysia.
Just released, the new Jet Teng (JTM) full composite Viper Jet in 5 amazing color schemes.
The JTM ViperJet in the colors of the High Performance Aircraft Training school (HPAT) is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro.
Pack contents:
JTM Viper RC functions:
Specifications:
.
