The HET L-39 Albatros is a high performance EDF Jet with fiberglass fuselage and foam/balsa wings suitable for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. A turbine conversion to JetCat P-20 or Lambert T25 (see similar conversion done with the JTM Hawk) can be done. Please check with us on suitable turbines, pipes and accessories. The model features a fiberglass fuselage and foam/balsa wings with retract hard points pre-installed in the nose and retract hatches. The model comes completely pre-painted. The Model features flaps. This model is truly ARF with all the major work done for you. Retracts and suitable scale oleo struts are available as option
The brand new HET-RC Me-262 is a high performance Jet for TWIN EDF units such as the WeMoTec Mini Fan 480 or the HET-RC 6904 and 2x powerful brushless motors such as the HET-RC Typhoon 2W, 3W or 2W-20 EDF. The ARF kit features a olive green painted fiberglass fuselage with balsa sheeted foam wings. This new revised version of the Me262 now features retract gear mounting points which are the perfect match for the optional available electric retracts system and oleo strut set.
The Messerschmitt Me 262 Schwalbe (German: “Swallow”) was the world’s first operational turbojet fighter aircraft. It was produced in World War II and saw action starting in 1944 in bomber/reconnaissance and fighter/interceptor roles. It was officially named Schwalbe because the swallow, when in a dive, is one of the fastest birds known. German pilots nicknamed it the “Turbo,” while the Allies called it the “Stormbird.” While the Me 262 had a negligible impact on the course of the war (approximately 150 Allied aircraft losses for 100 Me 262 losses), its design had a strong influence on postwar aircraft development.
The HET Me163 Komet is a Fiberglass Model with Foam/Balsa Wings powered by a 70mm EDF unit. The model has enough space to accommodate LiPo packs of various sizes allowing either 3s or 4s configurations Speed freak – beware !!!!!
The SM80-45 EDF system is based on the highly successful SM89-45 and SM110 multiblade rotor design. Specially designed for the new 80mm fan Jets out there (e.g. eFlite Habu) Unlike traditional EDF units, the SM80-45 features a 11 blade rotor for improved static thrust and sound. Turbine like sound in an small scale EDF model is a dream come through thanks to this fan.
Grumania Martin Baker Ejection Seat Kit in 1/10th scale. Although the ejection seat was originally made for the Grumania F 100, it fits other jets of similar size very well. The Kit consists of moulded plastic parts that can easily be assembled using CA glue.The seat is extremely light. Sizes (approx.): Height…………..: 115mm Depth……………: 65mm Width……………: 58mm
Add scale realism in looks and function to your model air plane. Whether you use fixed or retractable landing gears, these struts can be fitted. Helps to smoothen landings and improves ground handling, especially on grass fields. Package includes 3 pieces of trailing oleo struts (2x mains, 1x nose) and wheels.
Electric retract Set with aluminum oleo struts – suitable for EDF Jets and planes up to 2.5kg The electric retract set features: - 3 seconds overcurrent/jamming protection - Auto recovery after overcurrent and jamming protection - Smart circuit to prevent retract unit from accidentally retracting when powering on the radio (even if the retract switch is set to retract up) - Includes fitting to twist the strut 90 degrees when retracted - Suitable voltage 4.8-6V - 85gram retract loading – Working current 0.1-0.3A
Electric retract Set with aluminum wire struts – suitable for EDF Jets and planes up to 2.5kg The electric retract set features: - 3 seconds overcurrent/jamming protection - Auto recovery after overcurrent and jamming protection - Smart circuit to prevent retract unit from accidentally retracting when powering on the radio (even if the retract switch is set to retract up) - Includes fitting to twist the strut 90 degrees when retracted - Suitable voltage 4.8-6V - 85gram retract loading – Working current 0.1-0.3A
The HET L-39 Albatros is a high performance EDF Jet with fiberglass fuselage and foam/balsa wings suitable for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. A turbine conversion to JetCat P-20 or Lambert T25 (see similar conversion done with the JTM Hawk) can be done. Please check with us on suitable turbines, pipes and accessories. The model features a fiberglass fuselage and foam/balsa wings with retract hard points pre-installed in the nose and retract hatches. The model comes completely pre-painted. The Model features flaps. This model is truly ARF with all the major work done for you.
The HET Flying Wing in yellow color is a 1.8 meter wingspan powered glider for slope, ridge and thermals. Combined with a brush less motor and the included 10×6 folding prop and spinner, the HET Flying Wing is capable of powerful climbs. The HET Flying Wing features a fiberglass fuselage and foam/balsa sheeted wings. The Model completely build and requires a minimum of assembly. With it’s large speed envelope the Wing is suitable for beginners as well as experienced pilots looking for a aerobatic glider with good wind penetration. The Wing can be build as glider or powered glider.
The 3rd Jet for a 90mm Fan unit from HET-RC. Unlike the other 2 models (Sniper 90 and F-18), the HET-RC F-16 features a epoxy fiberglass fuselage resulting in a lighter body and more chip resistant surface. The F-16 is a available in 4 distinct color schemes, Edwards AFB, General Dynamics, Gray and Thunderbirds. The model is fully prepared for a retractable landing gear (see options below) and allows the installation of working gear doors. Powered by 8-10S and with its included wingtip missiles, this model will be the star at every flying site.
A great way to save some $$$. This Air Control System Kit Pro supports any Air Retract, Door and brake system Complete with: - 2x Airpower EV-2U Dual Action Valves - 1x AirPower EV-1U – Brake Valve - 1x Digit Dual Air Gauge - 2x Air System Fill Valve with Chuck - 10x Barbed Airline Fittings - 4x Airpower 1/8″ / 3 mm Air Tubing Mount - 10meter of Airpower 1/8″ Air Line - 2x Airpower Air Tanks this complete installation kit leaves no desires open.
The HET-RC L-39 Retracts are specially designed for the HET-RC L-39 Albatros composite EDF Jets. The set comes complete with air tank, hose and valves. These retracts come with oleo struts mounts suitable for the optional available HET-RC L-39 Oleo Struts.
Oleo Struts specially designed for the HET L-39 90 size EDF Jet. Add scale realism in looks and function to your model air plane. Whether you use fixed or retractable landing gears, these struts can be fitted. Helps to smoothen landings and improves ground handling, especially on grass fields. Package includes 2 trailing main gear oleo units with wheels and one trailing nose oleo strut with fork mounted wheel
The HET Flying Wing in yellow color is a 1.8 meter wingspan powered glider for slope, ridge and thermals. Combined with a brush less motor and the included 10×6 folding prop and spinner, the HET Flying Wing is capable of powerful climbs. The HET Flying Wing features a fiberglass fuselage and foam/balsa sheeted wings. The Model completely build and requires a minimum of assembly. With it’s large speed envelope the Wing is suitable for beginners as well as experienced pilots looking for a aerobatic glider with good wind penetration. The Wing can be build as glider or powered glider.
From 1st December 2010 till 28th February 2011 we are offering special prices on all JTM models. This offer is valid for in stock items and pre-ordered models.
Current pre-order waiting time is 4 weeks from order placed till shipping. Please note: We expect this new year promotion to have an impact on waiting times as the factory might not be able to cope with the demand. Hence if you wish to get an updated lead time before placing your order, please drop us an email.
The JTM BAE Hawk in the colors of the Swiss Airforce is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing.
The model comes completely pre-painted with all decals applied and protected by a clear coat. Further is the cockpit glued and all hatches are assembled and locks are installed in place. The Model features a full flying stabilizer, ailerons and flaps. A rudder is not cut out but can be fitted relatively easy by the modeler.
This model is truly ARF with all the major work done for you. One example is the flying stabilizer which comes completely assembled. Only 4 screews need to be tightened to install it on the model.
The JTM L-39 is now available in 2 additional striking colors: - Navy Color (L3906) - Breitling Jet Team – Black (L3907) Both colors are now available for pre-order. Make use of your JetTeng New Year promotion now !!
The JTM BAE Hawk in the colors of the RAF 2010 Demo Team is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing.
The model comes completely pre-painted with all decals applied and protected by a clear coat. Further is the cockpit glued and all hatches are assembled and locks are installed in place. The Model features a full flying stabilizer, ailerons and flaps. A rudder is not cut out but can be fitted relatively easy by the modeler.
This model is truly ARF with all the major work done for you. One example is the flying stabilizer which comes completely assembled. Only 4 screews need to be tightened to install it on the model.
The JTM L-39 Albatros in the colors of the High Performance Aircraft Training School (HPAT) is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing.
The model comes completely pre-painted with all decals applied and protected by a clear coat. Further is the cockpit glued and all hatches are assembled and locks are installed in place. The Model features flaps. This model is truly ARF with all the major work done for you.
JetCat P80 SE
Introducing the new JetCat P80-SE with more POWER and enhanced reliability. The P80-SE continues JetCat’s extremely successful P80 engine. The new design of the P80-SE incorporates an optimized compressor/diffusor-system, resulting in higher engine performance and reliability. The engine follows throttle commands almost without delay.
In addition to the outstanding features of or ECU V6.0, the new ECU V6.3 has an -auto power down- function built in, which allows to switch off the engine power supply (–> receiver off) before the engine cool down sequence has been finished.
In this case the ECU will stay powered on, finish the cool down sequence and then auto power down itself.
Convert your engine to kerosene startup. Includes fittings & Manual. Please note: For V6.0 ECUs or newer only. Older ECU can be upgraded. Please contact us or JetCat for further information regarding the ECU Upgrade
Dual digital air gauge for rc model planes with pneumatic retracts, doors or brake systems. Dual display of 2 independent air tank pressure readings. Specifications: - 25mm x 14mm LCD Display Screen - Dual Air Pressure Value Display - Three Pressure Unit Selection – PSI / Kg-cm2 / BAR
This easy-to-use air-line connector for pneumatic systems allows quick and easy assembly and disassembly of multiple airlines (5). The unit is rated at over 140 psi. It will not twist or kink the air line and is compatible with all pneumatic systems.
With the release of the new JTM L-39 full composite EDF Jet for 90mm Fans imminent, the guys from Jet Teng Models have released a few more pictures and 2 new videos of the L-39 Prototype in Breitling Colors.
The 2 pictures show close ups of the L-39 cockpit area. The factory pilot fabricated a simple custom cockpit for the plane. This cockpit will NOT be included in the production models as of now. But we are confident that a cockpit kit for the L-39 will be released in the near future once the demand for such an accessory becomes apparent to JTM.
Stay tuned for more updates. In the meantime enjoy the videos of the brake tests and the custom installed lighting kit
Pre Release Notification: Jet Teng is about to release their new L-39 full composite EDF Jet for 90mm Fans. The L-39 comes retract ready and equipped with flaps. Like the Hawk the L-39 is available in various color schemes, fully painted with water transfer decals applied and protected by a clear coat. The L-39 will be priced between 599 USD (Color scheme 1 – 3) and 650 USD (color scheme 4-5) depending on the color scheme. We expect initial availability in the first weeks of June with limited quantities available. Please drop us an email at sales@rc-warbirds.com to pre-order your L-39 today.
Pre Release Notification: Jet Teng has just informed us that new color schemes are available for the JTM Hawk full composite EDF jet for 90mm Fans. The new color schemes come with the same features as the standard Hawks. In addition we are offering the same optional packages (fans, motors, retracts) also for these Hawks. We expect initial availability in the first weeks of June with limited quantities available. Please drop us an email at sales@rc-warbirds.com to pre-order your Hawk today.
Tamjets is well known for its track record of producing high end durable turbine jet kits and ARFs. With almost a decade of experience producing composite jet aircraft, Tamjets is now expanding its product line to the electric jet market (EDF). Leveraging this experience, Tamjets are now able to produce scale aircraft that are high perfomance, light weight and strong all at an affordable price. Over one year in engineering strength and efficiency has been invested in making this model to provide maximum performance capable of top speeds eclipsing 150MPH. The Tamjets EDF F-16 ARF’s are fully composite with complete ducting, hardware and ready to accept Tamjets or MAP retracts and gear door cylinders
The Viper Jet in Bronze/Black Color with a composite molded fuselage and balsa wings is the latest high end edf jet from SAPAC. The plane comes pre-completely assembled and pre-painted. The model is designed for popular 70mm EDF Units such as the WeMoTec Mini Fan 480 or HET-6904. Please see the drop down menu below for available power options.
Retract mounts are pre-installed for quick installation. A fixed landing gear is included as well.
The Tamjets TJ90 is basically a downsized version of the TJ100. With this the fan shares all the same parts as the TJ100. With a very low weight, rigid carbon fiber shroud, aluminum motor mount body for improved cooling, is a high performance carbon fiber EDF Unit for demanding applications. The TJ90 was designed with NeuMotors in mind. In order to accommodate also motors with larger diameter, 2 versions of the TJ90 are available. One suitable for NeuMotors 14xx series (~36mm diameter) and one suitable for the larger diameter NeuMotor 15xx series (~38mm diameter).
32oz / 950ml Overflow Tank for Turbine and gasoline models. Extend your flight time by attaching this auxiliary overflow tank to your turbine jet during start-up and taxi operation. Tank comes ready assembled with all fuel lines and Festo connectors.
package of 3 TamJets Aluminum Fuel Stopper Upgrade Kits. The aluminum stopper kit works with any composite fuel tank and most fuel stoppers included in composite fuel tank kits. Improves seal of any composite fuel tank and avoids air/fuel leaks.
We have extended our range of connectors suitable for air retracts and turbine fuel/gas tubing. New in stock are the following Festo Connectors - Festo 3mm-3mm Straight - Festo 4mm-3mm Straight - Festo 4mm-4mm Straight - Festo 6mm-6mm Straight - Festo 4mm Shut Off Valve - Festo Shut Off Valve Mount .
We just got news from Jet Teng that the initial color options for the soon to be released L-39 Albatros have been selected. RC-Warbirds.com will stock the L-39 as soon as it is available. As with the Hawk we expect initial production shortages. Contact us today if you would like to pre-order the model.
Following are the initial available color options:
The HET L-39 Albatros is a high performance EDF Jet with fiberglass fuselage and foam/balsa wings suitable for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro.
The brand new HET-RC Me-262 is a high performance Jet for TWIN EDF units such as the WeMoTec Mini Fan 480 or the HET-RC 6904 and 2x powerful brushless motors such as the HET-RC Typhoon 2W, 3W or 2W-20 EDF. The ARF kit features a olive green painted fiberglass fuselage with balsa sheeted foam wings. This new revised version of the Me262 now features retract gear mounting points which are the perfect match for the optional available electric retracts system and oleo strut set.
The Messerschmitt Me 262 Schwalbe (German: “Swallow”) was the world’s first operational turbojet fighter aircraft. It was produced in World War II and saw action starting in 1944 in bomber/reconnaissance and fighter/interceptor roles. It was officially named Schwalbe because the swallow, when in a dive, is one of the fastest birds known. German pilots nicknamed it the “Turbo,” while the Allies called it the “Stormbird.” While the Me 262 had a negligible impact on the course of the war (approximately 150 Allied aircraft losses for 100 Me 262 losses), its design had a strong influence on postwar aircraft development.
The HET Me163 Komet is a Fiberglass Model with Foam/Balsa Wings powered by a 70mm EDF unit.
The SM80-45 EDF system is based on the highly successful SM89-45 and SM110 multiblade rotor design. Specially designed for the new 80mm fan Jets out there (e.g. eFlite Habu)
Grumania Martin Baker Ejection Seat Kit in 1/10th scale. Although the ejection seat was originally made for the Grumania F 100, it fits other jets of similar size very well. The Kit consists of moulded plastic parts that can easily be assembled using CA glue.The seat is extremely light.
Add scale realism in looks and function to your model air plane. Whether you use fixed or retractable landing gears, these struts can be fitted. Helps to smoothen landings and improves ground handling, especially on grass fields. Package includes 3 pieces of trailing oleo struts (2x mains, 1x nose) and wheels.
Electric retract Set with aluminum oleo struts – suitable for EDF Jets and planes up to 2.5kg
Electric retract Set with aluminum wire struts – suitable for EDF Jets and planes up to 2.5kg
