November 2011 features a picture taken during one of our trips to Nusa Jaya Malaysia. Mr. Hengs, amazing Twin turbine powered SU-27 shortly before the maiden flight..
Just released, the new Jet Teng (JTM) full composite Viper Jet in 5 amazing color schemes. The Viper Jet is a jet aircraft designed and produced by Viper Aircraft Corporation in kit form for homebuilding. It is a conventional, low-wing monoplane with swept wings and tail and two seats in tandem under a bubble canopy. The jet intakes are located at the sides of the fuselage and the tricycle undercarriage is retractable. Construction throughout is of composite materials
The JTM ViperJet in the colors of the High Performance Aircraft Training school (HPAT) is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. A turbine conversion to JetCat P-20, Lambert T25 or Wren 44 (see video below) can be done easily. Please check with us on suitable turbines, pipes and accessories. The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing. The model comes completely pre-painted with all decals applied and protected by a clear coat. Further is the cockpit glued and all hatches are assembled and locks are installed in place. This model is truly ARF with all the major work done for you. Retracts and suitable scale oleo struts are available as option.
Pack contents: Fully painted and finished glass fiber fuselage, fully assembled vertical fin and pre-installed ducting, clear canopy with pre-installed lock, one-piece fully painted and finished glass fiber wing with aileron, flap and retract hatches, exhaust ducting sheet, small parts, hardware pack, gear door covers.
Now available: The new JetTeng (JTM) ViperJet in one of 5 interesting colors:
Full size Information: The Viper Jet is a jet aircraft designed and produced by Viper Aircraft Corporation in kit form for homebuilding. It is a conventional, low-wing monoplane with swept wings and tail and two seats in tandem under a bubble canopy. The jet intakes are located at the sides of the fuselage and the tricycle undercarriage is retractable. Construction throughout is of composite materials.
Product Information: The JTM ViperJet in the colors of the High Performance Aircraft Training school (HPAT) is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro. A turbine conversion to JetCat P-20, Lambert T25 or Wren 44 (see video below) can be done easily. Please check with us on suitable turbines, pipes and accessories. The model features a full composite fuselage and wing with retract hard points pre-installed in the nose and retract hatches pre-cut in the wing. The model comes completely pre-painted with all decals applied and protected by a clear coat. Further is the cockpit glued and all hatches are assembled and locks are installed in place. This model is truly ARF with all the major work done for you. Retracts and suitable scale oleo struts are available as option.
Pack contents: Fully painted and finished glass fiber fuselage, fully assembled vertical fin and pre-installed ducting, clear canopy with pre-installed lock, one-piece fully painted and finished glass fiber wing with aileron, flap and retract hatches, exhaust ducting sheet, small parts, hardware pack, gear door covers.
This Jet Teng Bae Hawk in the colors of the 2010 Demo Team was converted from the original EDF propulsion setup to a turbine powered RC Jet by Heng.
The Model is powered by a Wren 44 Turbine Engine and carries 1 liter of kerosene. With this setup flight times of 6 minutes can be easily realized.
The model has a dry weight (hopper tank filled) of 4kg and hence a similar landing weight then the EDF powered version on 8S 4500mAh cells.
Another alternative for a turbine conversion would be the new Jet Cat P-20 turbine with 24N of thrust. Although less power then the Wren 44 shown here, the model would be considerably lighter during landing (assumption would be 3.9kg take-off weight -- 600ml tank -- and 3.3kg landing weight).
Enjoy the video of the Wren 44 powered JTM Hawk in action:
The T-45 Goshawk is a fully carrier-capable version of the Hawk Mk.60. It was developed for the United States Navy (USN) for use in training.
The Goshawk’s origins began in the mid-1970s, when the US Navy began looking for replacement for its T-2 and TA-4 trainers.
The US Navy started the VTXTS advanced trainer program in 1978.British Aerospace and McDonnell Douglas proposed a version of the Hawk and were awarded the T 45 contract in 1981.
As the Hawk had not been designed for carrier operations, numerous modifications were required for Navy carrier use, including improvements to the low-speed handling characteristics and a reduction in the approach speed.
Other changes were strengthened airframe,more robust and wider landing gear with catapult attachment and an arresting hook. It features a two-wheel nose landing gear.
The Goshawk first flew in 1988 and became operational in 1991. BAE Systems manufactures the fuselage aft of the cockpit, the air inlets, the vertical stabilizer of the T-45 at Samlesbury, and the wings at Brough, England.
Boeing manufactures the remainder of the aircraft and assembles them in St. Louis, Missouri.
On 16 March 2007 the 200th airframe was delivered to the US Navy. Their requirements call for 223 aircraft, and the T-45 service is slated to continue until at least 2035.
This JTM (Jet Teng) full composite T-45 was build by Rolf. Aside from additional scale features Rolf also added full navigation lights and afterburner simulation to his model.
The full composite plane is powered by a 90mm EDF Fan unit, 8S Lipo Battery and features a retractable undercarriage.
The model is further equipped with flaps to slow it down for landings.
With the release of the new JTM L-39 full composite EDF Jet for 90mm Fans imminent, the guys from Jet Teng Models have released a few more pictures and 2 new videos of the L-39 Prototype in Breitling Colors.
The 2 pictures show close ups of the L-39 cockpit area. The factory pilot fabricated a simple custom cockpit for the plane. This cockpit will NOT be included in the production models as of now. But we are confident that a cockpit kit for the L-39 will be released in the near future once the demand for such an accessory becomes apparent to JTM.
Stay tuned for more updates. In the meantime enjoy the videos of the brake tests and the custom installed lighting kit
Pre Release Notification: Jet Teng is about to release their new L-39 full composite EDF Jet for 90mm Fans. The L-39 comes retract ready and equipped with flaps. Like the Hawk the L-39 is available in various color schemes, fully painted with water transfer decals applied and protected by a clear coat. The L-39 will be priced between 599 USD (Color scheme 1 – 3) and 650 USD (color scheme 4-5) depending on the color scheme. We expect initial availability in the first weeks of June with limited quantities available. Please drop us an email at sales@rc-warbirds.com to pre-order your L-39 today.
Pre Release Notification: Jet Teng has just informed us that new color schemes are available for the JTM Hawk full composite EDF jet for 90mm Fans. The new color schemes come with the same features as the standard Hawks. In addition we are offering the same optional packages (fans, motors, retracts) also for these Hawks. We expect initial availability in the first weeks of June with limited quantities available. Please drop us an email at sales@rc-warbirds.com to pre-order your Hawk today.
Tamjets is well known for its track record of producing high end durable turbine jet kits and ARFs. With almost a decade of experience producing composite jet aircraft, Tamjets is now expanding its product line to the electric jet market (EDF). Leveraging this experience, Tamjets are now able to produce scale aircraft that are high perfomance, light weight and strong all at an affordable price. Over one year in engineering strength and efficiency has been invested in making this model to provide maximum performance capable of top speeds eclipsing 150MPH. The Tamjets EDF F-16 ARF’s are fully composite with complete ducting, hardware and ready to accept Tamjets or MAP retracts and gear door cylinders
The Viper Jet in Bronze/Black Color with a composite molded fuselage and balsa wings is the latest high end edf jet from SAPAC. The plane comes pre-completely assembled and pre-painted. The model is designed for popular 70mm EDF Units such as the WeMoTec Mini Fan 480 or HET-6904. Please see the drop down menu below for available power options.
Retract mounts are pre-installed for quick installation. A fixed landing gear is included as well.
The Tamjets TJ90 is basically a downsized version of the TJ100. With this the fan shares all the same parts as the TJ100. With a very low weight, rigid carbon fiber shroud, aluminum motor mount body for improved cooling, is a high performance carbon fiber EDF Unit for demanding applications. The TJ90 was designed with NeuMotors in mind. In order to accommodate also motors with larger diameter, 2 versions of the TJ90 are available. One suitable for NeuMotors 14xx series (~36mm diameter) and one suitable for the larger diameter NeuMotor 15xx series (~38mm diameter).
32oz / 950ml Overflow Tank for Turbine and gasoline models. Extend your flight time by attaching this auxiliary overflow tank to your turbine jet during start-up and taxi operation. Tank comes ready assembled with all fuel lines and Festo connectors.
package of 3 TamJets Aluminum Fuel Stopper Upgrade Kits. The aluminum stopper kit works with any composite fuel tank and most fuel stoppers included in composite fuel tank kits. Improves seal of any composite fuel tank and avoids air/fuel leaks.
We have extended our range of connectors suitable for air retracts and turbine fuel/gas tubing. New in stock are the following Festo Connectors - Festo 3mm-3mm Straight - Festo 4mm-3mm Straight - Festo 4mm-4mm Straight - Festo 6mm-6mm Straight - Festo 4mm Shut Off Valve - Festo Shut Off Valve Mount .
Jet Teng will be releasing the Hawk in 5 additional color schemes soon. The Hawks in their new colors come with the same features as the already released Black RAF100 Squadron, Red Arrows and T-45 Color scheme. Please contact us at sales@rc-warbirds.com to place your order for these great models.
November 2011 features a picture taken during one of our trips to Nusa Jaya Malaysia.
Just released, the new Jet Teng (JTM) full composite Viper Jet in 5 amazing color schemes.
The JTM ViperJet in the colors of the High Performance Aircraft Training school (HPAT) is a high performance EDF Jet in full composite design for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro.
Pack contents:
JTM Viper RC functions:
Specifications:
