RC-Warbirds Newsletter July 2011
HET L-39 Albatros – Breitling 2010
The HET L-39 Albatros is a high performance EDF Jet with fiberglass fuselage and foam/balsa wings suitable for 90mm Fan units such as the Schuebeler DS-51 or WeMoTec Midi Fan Pro.
A turbine conversion to JetCat P-20 or Lambert T25 (see similar conversion done with the JTM Hawk) can be done. Please check with us on suitable turbines, pipes and accessories.
The model features a fiberglass fuselage and foam/balsa wings with retract hard points pre-installed in the nose and retract hatches.
The model comes completely pre-painted.
The Model features flaps.
This model is truly ARF with all the major work done for you.
HET Flying Wing 1.8m + Prop Yellow
The HET Flying Wing in yellow color is a 1.8 meter wingspan powered glider for slope, ridge and thermals.
Combined with a brush less motor and the included 10×6 folding prop and spinner, the HET Flying Wing is capable of powerful climbs.
The HET Flying Wing features a fiberglass fuselage and foam/balsa sheeted wings. The Model completely build and requires a minimum of assembly.
With it’s large speed envelope the Wing is suitable for beginners as well as experienced pilots looking for a aerobatic glider with good wind penetration.
The Wing can be build as glider or powered glider.
HET F-16 Thunderbirds
The 3rd Jet for a 90mm Fan unit from HET-RC.
Unlike the other 2 models (Sniper 90 and F-18), the HET-RC F-16 features a epoxy fiberglass fuselage resulting in a lighter body and more chip resistant surface.
The F-16 is a available in 4 distinct color schemes, Edwards AFB, General Dynamics, Gray and Thunderbirds.
The model is fully prepared for a retractable landing gear (see options below) and allows the installation of working gear doors. Powered by 8-10S and with its included wingtip missiles, this model will be the star at every flying site.
AirPower Air Control System Kit – PRO
A great way to save some $$$. This Air Control System Kit Pro supports any Air Retract, Door and brake system
Complete with:
- 2x Airpower EV-2U Dual Action Valves
- 1x AirPower EV-1U – Brake Valve
- 1x Digit Dual Air Gauge
- 2x Air System Fill Valve with Chuck
- 10x Barbed Airline Fittings
- 4x Airpower 1/8″ / 3 mm Air Tubing Mount
- 10meter of Airpower 1/8″ Air Line
- 2x Airpower Air Tanks
this complete installation kit leaves no desires open.
HET Retract Set 90size (L-39)
The HET-RC L-39 Retracts are specially designed for the HET-RC L-39 Albatros composite EDF Jets. The set comes complete with air tank, hose and valves. These retracts come with oleo struts mounts suitable for the optional available HET-RC L-39 Oleo Struts.
HET L-39 Oleo Struts
Oleo Struts specially designed for the HET L-39 90 size EDF Jet. Add scale realism in looks and function to your model air plane. Whether you use fixed or retractable landing gears, these struts can be fitted. Helps to smoothen landings and improves ground handling, especially on grass fields. Package includes 2 trailing main gear oleo units with wheels and one trailing nose oleo strut with fork mounted wheel
HET Flying Wing 1.8m + Prop Red
The HET Flying Wing in yellow color is a 1.8 meter wingspan powered glider for slope, ridge and thermals.
Combined with a brush less motor and the included 10×6 folding prop and spinner, the HET Flying Wing is capable of powerful climbs.
The HET Flying Wing features a fiberglass fuselage and foam/balsa sheeted wings. The Model completely build and requires a minimum of assembly.
With it’s large speed envelope the Wing is suitable for beginners as well as experienced pilots looking for a aerobatic glider with good wind penetration.
The Wing can be build as glider or powered glider.
Festo Y-Tube fitting
Festo Y Fitting for 3mm and 4mm tubing.
Suitable for Air, Gas and Kerosene.
Festo Tee Tube fitting
Festo Tee Fitting for 3mm and 4mm tubing.
Suitable for Air, Gas and Kerosene.
Festo PUN-H Tubing
Festo 3mm and 4mm PUN-H tubing.
Suitable for Air, Gas and Kerosene.
