On the weekend from 16th to 17th October 2010 the Potong Pasir Flying Club in Singapore hosted the 2nd Singapore Radio Control Scale 2010 event.
As with the first such event held in Singapore in 2009, the club did a great job in organizing and hosting the show.

The competition featured around 24 local and overseas RC Scale planes of all types.
With participants traveling to Singapore all the way from Thailand, RCS might have the potential to grow in to a regional event in the future.

The event was split into 2 days and, unlike in 2009, 2 separate locations.
Briefing of all participants as well as static judging of all categories was held on Saturday 16th October from noon till late at the Potong Pasic Community Center in the heart of Singapore.

The large static display of all models in an easy accessible area gave the public plenty of possibilities to view the models up-close and discuss aspects of scale modeling and RC flight in general.

In a separate area, participants and spectators could take a look at the latest products and offerings of various local RC Model Shops and Vendors who displayed their goods and answered many questions.

For the second day, all participants traveled out to the PPFC Flying Field in the west of Singapore for a full day of flight judging.

Although the weather threatened the event on Sunday, with strong rain showers and thunderstorms in the early morning, all participants could take to the air before lunch time when the weather cleared.

With the exception of a few models, all pilots managed to conduct a total of 3 judging flights.

Following are the results of RCS 2010:

 

 

 

RCS 2010 Grand Champion
- Damri (Thailand) – Short SC7 Skyvan

Stand-off Scale
Champion:           
Lim Seng Hwee – Pitts Python

1st Runner-up:    
Salimi – YAK54

2nd Runner-up:   
Henry Chua – P51 Mustang

4th: Frederick Lim – Spitfire
5th: Frederick Lim – RV4
6th: Nicholas Lim – S. Bach 342
7th: Hussein – P51 Mustang
8th: Frederick Lim – P51 Mustang
9th: Chanatip (Thailand) – Spitfire
10th: Colin Mui – F4U Corsair
11th: Darren Lim – P47 Thunderbolt
12th: Sito – AT6 Texan

Masters Scale
Champion:         
Damri (Thailand) – Short SC7 Skyvan

1st Runner-up:  
Joe Yap – Dash 8

2nd Runner-up:  
Ng Tee Beng – G4-M1

4th: Salimi – Fokker DR4

 

 

 

 

Helicopter Scale
Champion:          
Ng Hoe Yue – Eurocopter EC135

1st Runner-up:   
Kelvin Yew – Augusta

2nd Runner-up:  
Derrick Kee – UH-1Y

4th: Ng Hoe Yue – Bell Jet Ranger
5th: Lee Howey – Jet Ranger
6th: Derrick Kee – Bell 47G
7th: Ng Hoe Yue – Aloutte II
8th: Darren Lee – Hugh 500

 

 

Top Static Score Award
Masters Scale:     
Damri (Thailand) – Short SC7 Skyvan

Stand-off Scale:   
Henry Chua – P51 Mustang

Helicopter Scale:
Ng Hoe Yue – Aloutte II

 

 

 

 

 

 

 

Stumax SM90-45

The SM90-45 EDF system is based on the highly successful SM110 multiblade rotor design.

Unlike traditional EDF units for the 90mm class, the SM90-45 features a 11 blade rotor for improved static thrust and sound.

Turbine like sound in an small scale EDF model is a dream come through thanks to this fan.

Suitable for output power of more then 3kw. At the tested input power of just under 3kw, the SM90-45 is giving just over 10lb (4.6kg) static thrust.

The SM90-45 features a FSA of 4771sqmm.

 

AirPower Five Action Super Multi-function Valve – EVO / ST

The AirPower 2010′ new EVSD-5U-Evo offers everything you could possibly need or want in a gear system controller.

All new software separates the sequencer timing so each setting is completely independent of each other, simplifying the sequencer programming.

In addition, you can now test the antilock brake setting without having to exit the programming sequence. Increase the voltage measurement function of the source and up to 3A Landing lights control system.

- 35mm x 20mm LCD Display Screen

- Dual Air Pressure Value Display

- Build inside Gear System Fail Safe

- Prevents an accidental gear-up when the transmitter is turned

- Compatible For 2.4 Ghz Radio System

- The intuition and simple programming operation

- Three Pressure Unit Selection – PSI / Kg-cm2 / BAR

- Pulse Brake function that can be adjusted

Also Available as SP Version – same features as above but comes without the landing light harness and small parts

 

 

 

 

 

AirPower Five Action Multi-function Valve

This new 5 port electronic valve covers all your needs in once brilliant device.

The Airpower EV5U multiport valve offers operation of your Gear, Doors and Brakes offering a fully programmable sequencer built in as well.

With sizing similar to a standard receiver, the EV5U offers a host of convenience in a simple, cost effective package. This one valve replaces 2 Dual Action Valves, 1 Brake Valve, 1 Sequencer and 3 Servos!

Easy programming of preset modes of fully custom sequences via the included EV-PC Program Card

Clear LED status display.

 

Electronic Dual Action Valve

This Airpower new electronic dual action valve offers electronic control of retracts or gear doors in one convenient electronic valve.

Supplied with barbed airline fittings

 

Electronic Single Action Valve

Completely digital brake control. Can be used as an on/off or proportional brake valve.

Also great for Air-Up / Spring down landing gear and speed brakes.

 

 

AirPower D-7 Lightweight Air Cylinders

AirPower light weight gear door cylinders. Available in sized from 12mm (1/2”) stroke to 44mm (1 3/4”) stroke.

The perfect cylinder for EDF jet and turbine model gear doors.

 

 

Fill Valve Set – Three Output

AirPower valve and fill chuck for pressurizing pneumatic systems include a no leak check valve to ensure that the system pressure is maintained.

Compatible with hand pumps or small portable air compressors.

The valve is made of durable aluminum. Three output simplifies installation and eliminates the need for an additional Tee connector.

Includes securing nut and fill chuck. Tested to 160psi.

 

 

AirPower Air System Water Trap

STOP pumping water into your air systems!! Our new air system water trap is a must have add-on for your air compressor. Using the element and cyclone effect, the water trap removes the dust and water drops sucked in by the compressor. Extend the life of your cylinders, As much as 99.9% of water is removed from the inside of air tubes by our own special collision separation technique! Can be used inline on compressor or mounted onboard the aircraft.

The water trap can be opened to empty it.

3 mm Barbed Tubing Connect

 

 

Dual Air Gauge – Fill Valve Assembly

AirPower Dual Air Gauge – Fill Valve Assembly

This lightweight machined Aluminum alloy mount is pre-assembled and ready for install. Includes two Pisco air gauges and two AirPower filler valves.

Makes for a nice and tidy install. (and saves some $$$)

Also available as Wide Version

 

 

 

 

 

 

Pro-Link Titanium Pushrods & Ball Links

High strength Titanium Pro-Link Push Rods and Ball Links for large scale RC models, EDF Jets and Turbine powered models. Available in lengths from 38mm (1 1/2”) to 127mm (5”).

Ball Links available in packages of 2 or 6

 

 

Electric Accessories

New electric accessories incl:

- Multiplex Power Connectors for battery or servo connections

- 10AWG Silicon wire for high power EDF applications

- 12AWG Silicon wire for high power EDF applications

 

RC-Warbirds will be closed for summer holidays from 25th June till 19th July.
Orders placed after 23rd June can therefore only be shipped once we return on 19th July.
We are sorry for the inconvenience caused.
We wish you and your family a great summer vacation (with good weather for some RC flying). And our customers in the southern hemisphere a great winter with some time to prepare the models for the next season .

Your RC-Warbirds Team

 

Typhoon 700 Motors

The new line of High End RC Typhoon 700 Motors are designed for high power EDF jet applications. With a can length of 60mm and 68mm these motors are designed for output powers of more the 3000kW for lipos ranging from 5S all the way to 12S.

Starting with the 10-12S Typhoon 700-68 we now have the first motors in stock.

New motor types are arriving nearly on daily basis. Make sure to check out our webpage frequently

Lipo and current draw recommendations are listed for each motor type on our webpage.

 

Q-Disconnect

2 pairs of Quick Connectors for retract air lines and retract tubing. Allows for easy separation between wing and fuselage airlines for retracts or brake systems.
Also available as self closing valves (to keep air from leaking out when disconnected).

.

 

HD T-Connector

Set of 10 High Density Plastic T-Joiners for Airlines. Suitable for 1/8” and 3mm retract and brake airline.
Also available as X connector with 4 ends.
.

 

EZ Wing Servo Mount

Wing servo mount special make for JR 168 or Hitec 5125. Mounting servos has never been easier before. Just glue the base to your servo hatch or wing skin and screw the servo in place.
.

 

EZ Servo Mount – Medium

Mounting servos has never been this easy than before. Why bother spending hours to install your servo. Go the easy way.
The Medium size servo mount comes with a #2 screw hardware package. This Medium Servo Mount is best suited for servos such as the JR 9411, 9011 and any other servo with a housing length of around 35mm (1.37 ”)
Also available as Standard Mount.
Will fit most Standard Servos such as the JR 537, 2721, 8411. Hitec 335, 635, 5645, 5945, 5975 and standard Futaba servo.
.

 

Tamjets – Servo Screws

Tamjets #2 Servo Screws with hex head.
Length: 7/16" (11mm)
Quantity: 100 pieces
Easy installation of servos at difficult locations with the hex head and the help of a ball head allen key.
Also available with 9/16" (14mm) length.

.

Price REDUCTION on HET-RC Planes

Massive Price Reduction
We have reduced all the prices of our HET-RC EDF Jets with immediate effect. Get your 70mm, twin or 90mm EDF Jet today.

 

JTM Hawks – V2

We are happy to announce the arrival of the first Version 2 JTM Hawks. The new updated version now comes with changed retract positions, ducting suitable for 90mm fan units and improved elevator linkage.
This model is a hot seller and usually sold as soon as it arrives as JTM has not yet fully ramped up the production of the kit. We therefore accept pre-orders of the model on a first come first serve basis. Drop us an email for more details and up to date availability on this great model.

 

Schuebeler DS-94-DIA HST

The brand new Schuebeler DS-94-HST 128mm High Static Thrust EDF system in plug’n play configuration.
The complete Fan system comes ready assembled with integrated motor and installed fan fix, cables fully installed and YGA 160 HV ESC pre-programmed and cabled to suite the Fan system.
With the DS-94-DIA HST Schuebeler Composite launches a completely new jet propulsion system. The system is based on a new 12-blade axial compressor wheel which is driven by the all new Schuebeler electronic commutated motor.
The 128 mm axial compressor generates a surpassing compression ratio and can therefore be integrated much more efficiently in huge jet models than classic ducted fans. The rotational speed level is only 26.500 rpm at an impressive exhaust speed of 95 m/s and a thrust of 10 kg. This high thrust impulse is therefore generated by a high exhaust speed and a high inner efficiency of the axial fan stage. In figures that means you can integrate this fan in jets up to 11 kg and an exhaust diameter of just 105 mm. The design of the 12-blade axial compressor wheel is based on speed ratios which are similar to the ratios of a full scale turbofan. That results besides a high efficiency in a perfect optical scale appearance and a sound which can only be compared to full scale jet engines. A silent whispering and fizzling of the axial compressor at idle rpm is predominated by an impressive jetstream noise coming from the exhaust at full throttle.
Please click on the picture above for more info…..

 

 

Schuebeler DS-77-DIA HST

Based on the design of the DS-94-HST, the new Schuebeler DS-77-HST is a a 120mm EDF unit with high static thrust.
An extraordinary challenge was the development of an electronic commuted DC motor that perfectly fits to the axial fan.
Taking the larger DS-94-HST as an example: The 12-blade compressor demands an impressive torque of 2,2 Nm at 26.500 rpm which can only be generated by a high torque motor of high diameter and shorter length. Consequently the new DSM 6740 Schuebeler motor has a diameter of 67 mm and a magnet length of 40 mm. This motor is fully integrated in the axialfan to assign a huge area for the main airflow. In addition to that the motor is perfectly.
Cooled and needs no efficiency decreasing internal ventilator. The motor is based on a two pole design to allow a flexible fit of the motor characteristics to the needs of the axial fan. Nevertheless the windings sit in a 12 slot stator to increase the torque and to avoid any winding deformation at high temperatures. The magnet is attached to a sheeted magnet holder and reinforced by a bandage made of IMS carbon fibre which allows a high rpm tolerance. The whole motor design was optimized in respect of excessive heat tolerance and of course a high efficiency even at high currents. The mechanical design of the Schuebeler DSM 6740 motor is based on established mechanical engineering and distinguishes itself by a shaft mount consisting of a fixed bearing and a pre-stressed floating bearing. Front- and endbell are fixed by 8 countersunk head screws, all surfaces are protected by hard anodizing. The result is a very high durability in combination with a low mechanical soundscape which allows the whispering of the axial fan to predominate even at idle rpm.
The conjunction between motor and axial fan is made by 4 handmade carbon stators which also guide the 3 motor phases through the UHM carbon sandwich shroud. The conversion of shaftpower to streampower is accomplished by 12 handmade carbon rotor blades which sit form-closed in precision aluminum swivels.

 

Schuebeler In-Fuse Intake Ring

The Schuebeler In-Fuse intake ring for both the DS-77-HST and DS-94-HST allows the easy installation of the HST fan system in fuses without EDF intake ducting. The large intake lip allows the fan to draw air from the standard turbine ducting without the need for a fully molded intake to fit the fan unit.

 

New selection of NeuMotors

Just in: a new selection of the popular NeuMotors 15xx series for 90mm EDF units.
Currently available models include:
- 1512 2.5D for 5-6S LiPo
- 1512 3D for 6-8S LiPo
- 1512 2Y for 8-10S LiPo
- 1515 3D for 10-12S LiPo
Make sure to visit our webpage frequently for more NeuMotors arrivals (next to arrive are 14xx series motors)

 

 

Airline for Retracts

Jet Legend HD Airline for Air Retracts and Brakes. Available in different colors. One package includes 10 meter of airline.

 

 

 

 

Air Joint/Link

Aluminum Air Joint / Link (Red Color) to securely join airlines (e.g. between fuselage and wing). Suitable for Jet Legend Airlines and any other 3mm or 1/8” retract / brake Air Line.

 

 

 

Twisted HD Servo extension

Hitech HD Twisted Servo Extension with 22AWG wires. Specially designed for the use with Digital Servos. Gold platted connectors.