From small to large (and super large), all kinds of EDF Jet’s made it to this years Electric Jet meet.

Enjoy the Pictures and Videos.
For more pictures please visit RC-Network or the picture page of Florian.

EDF Powered DC-9

www.youtube.com/watch?v=AK9hcwH0IKY

Horten Ho 229 Flying Wing

www.youtube.com/watch?v=Ah2Y7BbvJjc

Hawker Hunter

www.youtube.com/watch?v=yXlkumyjMRU

www.youtube.com/watch?v=jVkOY7b7dtE

Check out our facebook page (click here) for pictures of our visit to a model flying field at the southern border of Germany as well as our visit to a Warbird & Jet Meet near Munich Germany.

Michael was so kind to allow us to post his teaser Video on our Youtube Channel. Have a look:

www.youtube.com/watch?v=eYoL3oqvqXM

RC-Warbirds will be closed for summer holidays from 25th June till 19th July.
Orders placed after 23rd June can therefore only be shipped once we return on 19th July.
We are sorry for the inconvenience caused.
We wish you and your family a great summer vacation (with good weather for some RC flying). And our customers in the southern hemisphere a great winter with some time to prepare the models for the next season .

Your RC-Warbirds Team

Typhoon 700 Motors

The new line of High End RC Typhoon 700 Motors are designed for high power EDF jet applications. With a can length of 60mm and 68mm these motors are designed for output powers of more the 3000kW for lipos ranging from 5S all the way to 12S.

Starting with the 10-12S Typhoon 700-68 we now have the first motors in stock.

New motor types are arriving nearly on daily basis. Make sure to check out our webpage frequently

Lipo and current draw recommendations are listed for each motor type on our webpage.

Q-Disconnect

2 pairs of Quick Connectors for retract air lines and retract tubing. Allows for easy separation between wing and fuselage airlines for retracts or brake systems.
Also available as self closing valves (to keep air from leaking out when disconnected).

.

HD T-Connector

Set of 10 High Density Plastic T-Joiners for Airlines. Suitable for 1/8” and 3mm retract and brake airline.
Also available as X connector with 4 ends.
.

EZ Wing Servo Mount

Wing servo mount special make for JR 168 or Hitec 5125. Mounting servos has never been easier before. Just glue the base to your servo hatch or wing skin and screw the servo in place.
.

EZ Servo Mount – Medium

Mounting servos has never been this easy than before. Why bother spending hours to install your servo. Go the easy way.
The Medium size servo mount comes with a #2 screw hardware package. This Medium Servo Mount is best suited for servos such as the JR 9411, 9011 and any other servo with a housing length of around 35mm (1.37 ”)
Also available as Standard Mount.
Will fit most Standard Servos such as the JR 537, 2721, 8411. Hitec 335, 635, 5645, 5945, 5975 and standard Futaba servo.
.

Tamjets – Servo Screws

Tamjets #2 Servo Screws with hex head.
Length: 7/16" (11mm)
Quantity: 100 pieces
Easy installation of servos at difficult locations with the hex head and the help of a ball head allen key.
Also available with 9/16" (14mm) length.

.

- FAN: Het 6904
- Motor: HET 2W30
- Lipo: 6S 3000mAh
- ESC: Jeti Spin

The model is a real speed daemon. Based on Doppler readings taken from the flight video speeds are estimated to be in the range of 200km/h.

The Build Thread of this plane can be found at: http://www.daddyhobby.com/forum/showthread.php?t=54360

Enjoy the video of the model in action !!

www.youtube.com/watch?v=X71TJEqeZ4E

The 2 pictures show close ups of the L-39 cockpit area.
The factory pilot fabricated a simple custom cockpit for the plane. This cockpit will NOT be included in the production models as of now. But we are confident that a cockpit kit for the L-39 will be released in the near future once the demand for such an accessory becomes apparent to JTM.

Stay tuned for more updates. In the meantime enjoy the videos of the brake tests and the custom installed lighting kit

www.youtube.com/watch?v=iJtcTcp0hQU

www.youtube.com/watch?v=zwXjjr6SYqQ

www.youtube.com/watch?v=Xqugj5CmEqc

www.youtube.com/watch?v=P6BGMd99jdQ

www.youtube.com/watch?v=Qw5Glvf8EUc

JTM L-39

Pre Release Notification:
Jet Teng is about to release their new L-39 full composite EDF Jet for 90mm Fans. The L-39 comes retract ready and equipped with flaps. Like the Hawk the L-39 is available in various color schemes, fully painted with water transfer decals applied and protected by a clear coat.
The L-39 will be priced between 599 USD (Color scheme 1 – 3) and 650 USD (color scheme 4-5) depending on the color scheme.
We expect initial availability in the first weeks of June with limited quantities available.
Please drop us an email at sales@rc-warbirds.com to pre-order your L-39 today.

Color schemes:

Color Scheme: L3901

Color Scheme: L3902

Color Scheme: L3903

Color Scheme: L3904

Color Scheme: L3905

JTM Hawk – New Colors

Pre Release Notification: Jet Teng has just informed us that new color schemes are available for the JTM Hawk full composite EDF jet for 90mm Fans. The new color schemes come with the same features as the standard Hawks. In addition we are offering the same optional packages (fans, motors, retracts) also for these Hawks.
We expect initial availability in the first weeks of June with limited quantities available.
Please drop us an email at sales@rc-warbirds.com to pre-order your Hawk today.

Color schemes:

Color Scheme: HB002C

Color Scheme: HB003C

Color Scheme: HB004C

Color Scheme: HG001C

Color Scheme: HR1252C

Tamjets F-16 1/12 Tigermeet

Tamjets is well known for its track record of producing high end durable turbine jet kits and ARFs. With almost a decade of experience producing composite jet aircraft, Tamjets is now expanding its product line to the electric jet market (EDF). Leveraging this experience, Tamjets are now able to produce scale aircraft that are high perfomance, light weight and strong all at an affordable price. Over one year in engineering strength and efficiency has been invested in making this model to provide maximum performance capable of top speeds eclipsing 150MPH.
The Tamjets EDF F-16 ARF’s are fully composite with complete ducting, hardware and ready to accept Tamjets or MAP retracts and gear door cylinders

Sapac Viper Jet Bronze/Black

The Viper Jet in Bronze/Black Color with a composite molded fuselage and balsa wings is the latest high end edf jet from SAPAC. The plane comes pre-completely assembled and pre-painted. The model is designed for popular 70mm EDF Units such as the WeMoTec Mini Fan 480 or HET-6904. Please see the drop down menu below for available power options.

Retract mounts are pre-installed for quick installation. A fixed landing gear is included as well.

TamJets TJ90

The Tamjets TJ90 is basically a downsized version of the TJ100. With this the fan shares all the same parts as the TJ100. With a very low weight, rigid carbon fiber shroud, aluminum motor mount body for improved cooling, is a high performance carbon fiber EDF Unit for demanding applications.
The TJ90 was designed with NeuMotors in mind. In order to accommodate also motors with larger diameter, 2 versions of the TJ90 are available. One suitable for NeuMotors 14xx series (~36mm diameter) and one suitable for the larger diameter NeuMotor 15xx series (~38mm diameter).

Tamjet Overflow Tank

32oz / 950ml Overflow Tank for Turbine and gasoline models.
Extend your flight time by attaching this auxiliary overflow tank to your turbine jet during start-up and taxi operation.
Tank comes ready assembled with all fuel lines and Festo connectors.

Tamjet Aluminum Fuel Stopper Kit

package of 3 TamJets Aluminum Fuel Stopper Upgrade Kits.
The aluminum stopper kit works with any composite fuel tank and most fuel stoppers included in composite fuel tank kits.
Improves seal of any composite fuel tank and avoids air/fuel leaks.

Festor Air & Turbine Products

We have extended our range of connectors suitable for air retracts and turbine fuel/gas tubing.
New in stock are the following Festo Connectors
- Festo 3mm-3mm Straight
- Festo 4mm-3mm Straight
- Festo 4mm-4mm Straight
- Festo 6mm-6mm Straight
- Festo 4mm Shut Off Valve
- Festo Shut Off Valve Mount

.

 Tamjets Heat Shield

Adhesive backed Heat Shield Blanket

Protects your turbine compartment or engine firewall from heat and fire damage.
Size: 12” x 12” (30.5cm x 30.5cm)

Hysol 50ml Mixer

Pack of 6 short mixers for use with Loctite Hysol 50ml adhesive systems cartridge.

Available new colors:

JTM-HB002C

HB003C

HB004C

HG001C

HR1252C

Following are the initial available color options:

Color option 1: L3901

Color option 2: L3902

Color option 3: L3903

Color option 4: L3904

Color option 5: L3905

Here is a short preview by Stu:

Stumax is currently finalizing the development of two new fans, designated SM100-45 and SM90-45, being 100mm dia and 90mm dia with 45mm hub dia. As there is a demand for a good sounding 90mm fan for a while now, Stu originally tried trimming down an SM110-52 to end up with a 90mm fan unit. However it became quickly apparent that this approach resulted in a too heavy fan unit. At the end Stu designed the SM100 around a SM110-45 motor tube, utilizing the same strator design but with shorter blades to end up with a 100mm fan unit. The goal for the 100mm fan was 5kW using a Neu 15 series motor. Testing shows that the power vs rpm calcs were pretty close, and a 1521-1.5Y on 12S seems to be a good choice, needs a lot of flight testing to confirm, of course. For the SM90-45 it looks like a 1515-2Y will be a good choice on 12S for 3kW, or perhaps a 1515-1.5Y on 8S – again, this needs to be thoroughly tested before these figures are put in stone.

The rotors are 11 bladed, with the blades being individually injection moulded from long glass filled Nylon. the blades are assembled onto front and rear rings which lock them all together. Once the rotor is assembled, it is attached to a shaft adapter which then mounts to a dummy shaft in the lathe, then the front face is machined flat and the bore at the front is machined out to accept the aluminium ring which forms the locating face for the spinner. A lot of work and fiddling, but this ensure the spinner runs 100% true. As assembled, the rotors are close to being perfectly balanced, and I’ve actually run them without further balancing. Production rotors will be dynamically balanced.
Thrust-wise, the SM100-45 is matching the 110mm fans up to 3.8kW then it tails off a bit as expected. On 3.8kW it delivers 6.0kg thrust. The static efficiency is up around 92-94%, which is staggering, really, and the reason it’s performing close to a fan with much more FSA. The SM90-45 is giving just over 10lb static thrust with just under 3kW, which is still pretty good considering it’s a cut down rotor and loses the aerodynamic tricks that have been used at the blade tips.The FSA for the SM100-45 is 6264sqmm and 4771sqmm for the SM90-45.

The SM90 is basically the SM100-45 rotor trimmed down to 90mm, using the same motor tube and a 90mm dia shroud. Also new are the shrouds of both the SM100 and SM90 which are carbon/Rohacell sandwich construction at this point.
Sound-wise, the SM100-45 is quieter than the SM110-52 but the sound isn’t as interesting, simply because the SM110-52 was designed to have certain pleasing harmonics, and the SM100-45 was designed to be super efficient (hence its quietness).

Release date: Well, Stu is not promising a release date but he hopes to have the first batches done within one month. As with all Stumax products the fans will only be released once they are 100% right.

RC-Warbirds  will carry the SM100 and SM90 as soon as they are available. Please drop us an email for more info’s and pre-orders.

Below is the final episode of FlyBoyTha1’s great review of the JTM Hawk.
He concludes the Video Review with the flight of his finished model.

His Black Colored Hawk is equipped with:

• TamJets TJ90 Fan shroud with a WeMoTec Midi Fan Rotor
• NeuMotors 1415/1.5Y on 8S
• Hyperion 4200 35C 8S Lipo Pack
• TamJet Oleo Struts and MPI wheels (brakes will be added in the near future)

The power setup used generates 2.2kW at 8S with 80Amp peak

Enjoy the flight video !!

www.youtube.com/watch?v=CSNFOAgYVdw

Part 2

www.youtube.com/watch?v=-NCLA3KUM0w

www.youtube.com/watch?v=rDa9cRFa394

www.youtube.com/watch?v=Kg1lb70h_EA

Massive Price Reduction
We have reduced all the prices of our HET-RC EDF Jets with immediate effect. Get your 70mm, twin or 90mm EDF Jet today.

JTM Hawks – V2

We are happy to announce the arrival of the first Version 2 JTM Hawks. The new updated version now comes with changed retract positions, ducting suitable for 90mm fan units and improved elevator linkage.
This model is a hot seller and usually sold as soon as it arrives as JTM has not yet fully ramped up the production of the kit. We therefore accept pre-orders of the model on a first come first serve basis. Drop us an email for more details and up to date availability on this great model.

Schuebeler DS-94-DIA HST

The brand new Schuebeler DS-94-HST 128mm High Static Thrust EDF system in plug’n play configuration.
The complete Fan system comes ready assembled with integrated motor and installed fan fix, cables fully installed and YGA 160 HV ESC pre-programmed and cabled to suite the Fan system.
With the DS-94-DIA HST Schuebeler Composite launches a completely new jet propulsion system. The system is based on a new 12-blade axial compressor wheel which is driven by the all new Schuebeler electronic commutated motor.
The 128 mm axial compressor generates a surpassing compression ratio and can therefore be integrated much more efficiently in huge jet models than classic ducted fans. The rotational speed level is only 26.500 rpm at an impressive exhaust speed of 95 m/s and a thrust of 10 kg. This high thrust impulse is therefore generated by a high exhaust speed and a high inner efficiency of the axial fan stage. In figures that means you can integrate this fan in jets up to 11 kg and an exhaust diameter of just 105 mm. The design of the 12-blade axial compressor wheel is based on speed ratios which are similar to the ratios of a full scale turbofan. That results besides a high efficiency in a perfect optical scale appearance and a sound which can only be compared to full scale jet engines. A silent whispering and fizzling of the axial compressor at idle rpm is predominated by an impressive jetstream noise coming from the exhaust at full throttle.
Please click on the picture above for more info…..

Schuebeler DS-77-DIA HST

Based on the design of the DS-94-HST, the new Schuebeler DS-77-HST is a a 120mm EDF unit with high static thrust.
An extraordinary challenge was the development of an electronic commuted DC motor that perfectly fits to the axial fan.
Taking the larger DS-94-HST as an example: The 12-blade compressor demands an impressive torque of 2,2 Nm at 26.500 rpm which can only be generated by a high torque motor of high diameter and shorter length. Consequently the new DSM 6740 Schuebeler motor has a diameter of 67 mm and a magnet length of 40 mm. This motor is fully integrated in the axialfan to assign a huge area for the main airflow. In addition to that the motor is perfectly.
Cooled and needs no efficiency decreasing internal ventilator. The motor is based on a two pole design to allow a flexible fit of the motor characteristics to the needs of the axial fan. Nevertheless the windings sit in a 12 slot stator to increase the torque and to avoid any winding deformation at high temperatures. The magnet is attached to a sheeted magnet holder and reinforced by a bandage made of IMS carbon fibre which allows a high rpm tolerance. The whole motor design was optimized in respect of excessive heat tolerance and of course a high efficiency even at high currents. The mechanical design of the Schuebeler DSM 6740 motor is based on established mechanical engineering and distinguishes itself by a shaft mount consisting of a fixed bearing and a pre-stressed floating bearing. Front- and endbell are fixed by 8 countersunk head screws, all surfaces are protected by hard anodizing. The result is a very high durability in combination with a low mechanical soundscape which allows the whispering of the axial fan to predominate even at idle rpm.
The conjunction between motor and axial fan is made by 4 handmade carbon stators which also guide the 3 motor phases through the UHM carbon sandwich shroud. The conversion of shaftpower to streampower is accomplished by 12 handmade carbon rotor blades which sit form-closed in precision aluminum swivels.

Schuebeler In-Fuse Intake Ring

The Schuebeler In-Fuse intake ring for both the DS-77-HST and DS-94-HST allows the easy installation of the HST fan system in fuses without EDF intake ducting. The large intake lip allows the fan to draw air from the standard turbine ducting without the need for a fully molded intake to fit the fan unit.

New selection of NeuMotors

Just in: a new selection of the popular NeuMotors 15xx series for 90mm EDF units.
Currently available models include:
- 1512 2.5D for 5-6S LiPo
- 1512 3D for 6-8S LiPo
- 1512 2Y for 8-10S LiPo
- 1515 3D for 10-12S LiPo
Make sure to visit our webpage frequently for more NeuMotors arrivals (next to arrive are 14xx series motors)

Airline for Retracts

Jet Legend HD Airline for Air Retracts and Brakes. Available in different colors. One package includes 10 meter of airline.

Air Joint/Link

Aluminum Air Joint / Link (Red Color) to securely join airlines (e.g. between fuselage and wing). Suitable for Jet Legend Airlines and any other 3mm or 1/8” retract / brake Air Line.

Twisted HD Servo extension

Hitech HD Twisted Servo Extension with 22AWG wires. Specially designed for the use with Digital Servos. Gold platted connectors.

Your RC-Warbirds Team